info@sinnoss.com
+86 18652187179
Toggle Navigation
Technical parameter
Threaded installation, direct replacement of traditional pressure gauges;
4-20mA remote transmission, 0~10V and other outputs are optional. Optional HART;
Intelligent compensation, on-site display, zero point and slope can be adjusted on site;
The shell made of stainless steel and aluminum reaches the protection level of IP67, and explosion-proof products can be provided;
Wide measurement range, high precision, equipped with reverse polarity protection and instantaneous overvoltage protection device, optional anti-interference treatment;
With self-diagnosis and fault alarm output function;
Parameter setting and function configuration can be performed remotely via RS485;
Parameter setting and function configuration can be performed on the spot by pressing the button;
Range and damping are continuously adjustable on site;
| Pressure range | -0.1MPa-0, 0-100MPa range range can be done; Another micro pressure, special range can be customized |
| Power supply | 12~36VDC (conventional power supply) |
| Pressure type | Gauge pressure, absolute pressure, sealed gauge pressure |
| Measuring medium | Liquid, gas, oil, etc. (compatible with stainless steel) |
| Output signal | 4~20mA, RS485, 0~10V, 0~5V, HART protocol, can be customized according to customer requirements |
| Accuracy class | 0.5% (default), 0.25% (customizable) |
| Overload class | 150%FS~300%FS |
| Temperature influence | ±0.1%FS/10℃ |
| Protection class | IP65 (plug type) IP67 (cable type) |
| Response time | ≤100ms (up to 90%FS) |
| Operating temperature | -20~75°C (default), -20~300°C (install heat sink) |
SNS-2088 Industrial Pressure Transmitter is widely used in various industries. Low cost and good measurement effect.
Industrial Automation Measurement and Control
Environmental protection and water treatment system
Pump and compressor industry
Other hydraulic and pneumatic field measurements
Equipment testing
city water system
Machinery manufacturing
Power metallurgy
| SNS-2088 | Industrial Pressure Transmitter-Diffusion Silicon | ||
| Code | Pressure Range | ||
| (0~X)KPa | -100KPa~0~1KPa…20KPa…100MPa | ||
| Code | Output Signal | ||
| B1 | 4-20mA | ||
| B3 | 0-10v | ||
| B4 | 0-5V | ||
| B5 | 1-5V | ||
| H | HART | ||
| S | RS485 | ||
| Code | Process Connection | ||
| P1 | M20*1.5 | ||
| P2 | 1/2NPT external thread | ||
| P0 | Customize | ||
| Code | Additional functions | ||
| G | Gauge pressure (default) | ||
| A | Absolute pressure | ||
| S | Sealed gauge pressure | ||
| E | Explosion-proof | ||
| T | High temperature -XX℃ | ||
| SNS-2088 (0-60)MPa B1+H P1 G E |
