info@sinnoss.com
+86 18652187179

non contact high precision Radar Level Transmitters 80G /26G

Radar level transmitters use radar technology to perform non-contact continuous level measurement. The radar level indicator converts the level into an electrical signal. The level signal output can then be utilised by other instrumentation to monitor or control. Liquids and solids are commonly measured with this measuring technique. Like: Fly ash silo. Radar level sensors are divided into: Pulsed radar technology and frequency modulated continuous wave (FMCW) radar level sensors.
Products Inquiry

PRODUCT INFORMATION

Transmitting frequency

76GHz~81GHz


Measurement range

LM78x0:0.3 m~60m  

 LM78x1:0.08 m~30m 

LM78x2:0.6m~120m

Measurement accuracy

±lmm

Field angle

3°/8°

Use the dielectric constant range

>=2

communication mode

LM782x: indicates the MODBUS

LM783x:HART

Signal output

LM782x:4to 20mAor RS-485

LM783x:4~20mA

Field operation/programming

128x64 dot matrix display /4 buttons

can configure the upper computer setup software

Industrial temperature/humidity

T0:-40~85°C/≤95%RH:T1:-40~200°C:T2:-40~500°C;T3:-40~1000°C

Shell material

Aluminum alloy,stainless steel

Antenna type

Lens antenna/anti-corrosion antenna/quartz isolation flange

Process pressure

-0.1~2MPa

Product size

 100*270mm

Cable inlet

M20*1.5

Recommended cable

AWG18 or 0.75mm2

Level ofprotection

IP68

Anti-hazard classification

ExdiallCT6

Way to install

Thread or flange

Net/gross weight

2.480Kg/2.995Kg

Box size

370*270*180mm

1716939805325600.jpg