info@sinnoss.com
+86 18652187179
Toggle Navigation

Factory 4-20mA magnetic flap level gauge with remote stainless steel sensor magnetic water level switch

Magnetic flap level gauge1, compared with the traditional glass tube, the plate level meter has higher reliability, safety, advancement and practicality.2, the most significant feature of the side-mounted magnetic flip level meter is that the liquid medium is completely isolated from the indicator, so it is very safe, reliable and durable in any case, and various types of liquid level meters are equipped with level alarm and control switches, which can realize the upper and lower offside alarm, control or interlock of the level or boundary.3, equipped with static pressure type liquid level transmitter or reed resistance type liquid level transmitter, liquid level, boundary signal can be converted into two-wire 4-20mADC standard signal, to achieve remote indication, detection, recording and control.
Products Inquiry

PRODUCT INFORMATION

Technical parameter

1, Measuring range: 300mm ~ 6000mm (> 6000mm)

2, installation form: side installation, top installation, bottom installation, please specify when ordering

3, body material: stainless steel, engineering plastics, glass steel, PTFE, 316, etc

4, instrument structure: side mounting, top mounting and insulation jacket type

5, display mode: 1. Spot direct reading; 2. Upper and lower limit alarm (output signal: normally open or normally closed)

6, remote transmission: output signal 4 ~ 20mA

7. Connection mode: threaded connection, flange connection, etc

8, medium temperature: -20℃ ~ 80℃, 80℃ ~ 480℃, (anti-corrosion type -20℃ ~ 80℃)

9, measurement accuracy: ≤±10mm

10, medium density: liquid level: ρ≥0.5g/cm3 boundary: ρ1-ρ2≥0.25g/cm3

11, nominal pressure: 0 ~ 2.45Mpa, 2.45Mpa ~ 9.6Mpa

12. Protection level: IP65

13. Power inlet: M20×1.5 (internal thread)